P9V-300/6 – 3 HP

Farmmate

Twin impeller shallow well jet pumps. Excellent self priming with high pressure for larger household requirements or rural applications. Cast iron body with stainless steel shaft and Noryl internals. For more detailed information click here.

CTJ 150 / 200 / 300

Ranchmate

A range of multiple impeller, high flow, centrifugal pumps, ideally suited for very large households, and properties, where additional water supply is demanded for other than domestic purposes. This includes water supply for lawn sprinklers, small irrigation, stock troughs and fire protection. Solid metal construction with non-corrosive internals, mechanical seal, thermal motor overload protection makes this a hard working pump range.  For more detailed information click here.

Extra performance takes care of extra water demand. Heads to 46M and flows to 260 LPM makes them extremely versatile where more than just a domestic supply is needed.

CTBJ150 / 200 / 300

Rangemate

Single impeller, self priming jet pumps, combining substantial flow with very useable pressures. Particularly suited to applications where self priming benefits are important and the application demands a flexible operating performance. Pump internals are exceptionally strong, with brass impeller.  For more detailed information click here.

CTJ2-150 / 200

Single impeller, metal body, centrifugal pumps with high efficiencies. These pumps operate on suction lifts up to 8M, with minimal reduction in performance. Rugged in construction with Noryl, brass or stainless steel impellers depending on model, they provide high heads/medium flows, or medium head/high flow. Smaller units make ideal household supply pumps, while others excel in water transfer, sprinkler operation and dairy washdown.  For more detailed information click here.

SPLI-300(T)

2.2kW in single or 3 phase. Big flows for dairy washdown or irrigation

SSM50 / 100

All 304 grade stainless steel suits saline and slightly corrosive liquids and can be set up for automatic pressure system application.

CTM 50/100/150/200

CTC100

Open impeller with high flows using only .75kW. An efficient water transfer unit.

SCM100

Up to 1.5kW with brass impellers in1.1 / 1.5kW sizes. Versatile range of 4 models. (SCM100 Brass Impeller).

SDK100

Open brass impeller suitable for pumping of light waste, such as from secondary septic tanks.

SPM200

1.5kW in medium head/flow, ideal for small irrigation from shallow well supply.

Designed to be capable of lifting water from depths beyond the ability of conventional ‘above ground’ centrifugal pumps. Typically used in deep bores or wells, they are optional with injector and all fittings, only needing the dual suction / return pipes to facilitate installation. Capable of very high pressures and operation to significant depths, with a choice of injectors, their design enables installation away from the well whilst still retaining their excellent re-priming capability.  For more detailed information click here.

Boremate

CTA 150/200/300

CTA100

A range from .55kW to 1.5kW swimming pool and transfer pumps, construction in glass loaded poly prop. Shaft in stainless steel with double insulation motor. Construction to IP55 protection, class F insulation, epoxy impregnated windings with in built overload protection. For more detailed information click here.

Poolmate

FCP 550/750/1100S2

550-1100 series are for medium to large pools. Rapid priming, quiet operation and flows to nearly 350LPM makes this range the popular home pump.

FCP1500S

1500S series is designed for extra large pools where flows to 500LPM may be required. Extra robust construction to ensure a long working life.

SWP 250

Plastic construction with brass impeller and stainless steel wear plate. Self priming suitable for sea water transfer, Agricultural and industrial water.